2300ux Optical Jukebox Conversion Guide (AA994-96001, May 2004)

Completing the Conversion

40 1000ux/1900ux/2300ux Optical Jukebox Conversion Guide

Testing the conversion

To test the conversion:

1. Remove the screwdriver securing the picker.

2. Replace the right side access panel.

3. Replace the left and top access panel on the jukebox.

4. Reconnect the power switch cable and the front panel cable.

5. Connect the jukebox to power.

6. Power on the jukebox by setting the power switch to the on position.

7. Verify that the display comes on. It may still read DEVICE FAILED, but that is

acceptable at this point. If the display does not come on, check the cabling.

8. Secure the left and top access panel to the jukebox.

9. Rotate the control panel display so that the display is best seen from the front of the

jukebox.

10. Reattach and secure all other access panels.

11. Connect the jukebox to power and power it on.