2300ux Optical Jukebox Conversion Guide (AA994-96001, May 2004)

Converting an MO Jukebox to UDO or Mixed-Media Technology

28 1000ux/1900ux/2300ux Optical Jukebox Conversion Guide

6. Secure the cable to the back inside of the frame by routing it through the 2 plastic cable

clamps attached to the frame. Close the clamps once the cable is positioned properly.

Figure 13: Route for the 68-pin SCSI cable

7. Pass the cable through the slot in the frame and to the buffer board. Feed all slack in the

cable through this hole.

8. Connect the cable to the buffer board (see Figure 14).

9. Loosely fold the slack in the cable so that it remains in the buffer board module.

Figure 14: 68-pin SCSI cable connected to the buffer board

10. Close the buffer board module and secure it with the existing screws.

1 Plastic cable clamps

2 68-pin SCSI cable

3 Bundle of multi-colored cables

4 Slot leading to buffer board

1 68-pin SCSI cable 2 Buffer board