HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

Installing and configuring the 4/256 SAN Director36
3 14U Rack Mount Kit Rails, includes the following:
• Left rack mount shelf bracket, (1); Right rack mount shelf bracket (1)
• Left upper rack mount bracket assembly includes: Left upper rack mount bracket (flat);
left upper rack mount bracket (L-shaped); screw (torque to 32 inch-pounds)
• Right upper rack mount bracket assembly includes: right upper rack mount bracket
(flat); right upper rack mount bracket (L-shaped); screw (torque to 32 inch-pounds)
• M5 Tinnermans (0590-2318) and M5 Torx screws (0515-0671) are required rack mount
kit hardware.
4 14U Rack Mount Kit hardware:
#10-32 x 5/16 Phillips flathead screws (8); #10-32 x 5/16 Phillips panhead screws with
washers (4)
For use with an HP 42U rack (or racks with square holes): #10-32 x 5/16 retainer nuts;
#1/4-20 x 0.500 Phillips panhead screws with glue (16); 0.375-inch square washers (16)
For use with rack with round holes: #10-32 clip nut (package of 20, only 4 required);
#1/4-20 x 1/2 inch Phillips panhead screws with lockhead washers (16)
Table 5 Carton contents checklist (continued)
Item Summary