HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

SAN Director installation guide 161
To record critical switch and SAN information:
1. Open a telnet session and login to the 4/256 SAN Director as admin. The default passwords
“password”. Enable the logging function on your telnet or serial console connection.
2. Back up the current configuration.
Type configUpload; then, enter the requested information at the prompts.
NOTE: The configUpload command can be entered through a telnet or serial session, but you
must have an Ethernet connection between the 4/256 SAN Director and the server name or IP of
the host to complete the upload process. For more information, refer to the help configUpload
command or the Fabric OS command reference manual.
This command uploads the switch configuration to the customer-defined FTP server, making it
available for downloading if required later on. For more information about this command, refer
to the Fabric OS command reference manual.
3. Record the 4/256 SAN Director values on a workstation (see step 4, next, through step 9).
4. Record the WWN value: Type wwn; then, copy the command output into a file named
“config-miscinfo.txt”.
5. Record the IP address information.
swDir:admin> configupload
Server Name or IP Address [host]: 123.123.123.123
User Name [None]: Admin24
File Name [config.txt]: config-switch0.txt
Password: xxxxxxxx
upload complete
swDir:admin>
swDir:admin> wwn
10:00:00:60:69:00:00:0a