HP StorageWorks Fabric OS 6.2 administrator guide (5697-0016, May 2009)

62
SAN Switch, HP StorageWorks 8/40 SAN Switch, HP StorageWorks 8/80 SAN Switch, and HP
StorageWorks 400 Multi-Protocol Router
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
Down Marginal
----------------------------------
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the prompt is (0..0),
** the policy parameter is NOT applicable to the switch.
** Simply hit the Return key.
Bad PowerSupplies contributing to DOWN status: (0..2) [2] 0
Bad PowerSupplies contributing to MARGINAL status: (0..2) [1] 0
Bad Temperatures contributing to DOWN status: (0..6) [2] 0
Bad Temperatures contributing to MARGINAL status: (0..6) [1] 0
Bad Fans contributing to DOWN status: (0..3) [2] 0
Bad Fans contributing to MARGINAL status: (0..3) [1] 0
Out of range Flash contributing to DOWN status: (0..1) [0] 0
Out of range Flash contributing to MARGINAL status: (0..1) [1] 0
MarginalPorts contributing to DOWN status: (0..32) [2] 0
MarginalPorts contributing to MARGINAL status: (0..32) [1] 0
FaultyPorts contributing to DOWN status: (0..32) [2] 0
FaultyPorts contributing to MARGINAL status: (0..32) [1] 0
MissingSFPs contributing to DOWN status: (0..32) [0] 0
MissingSFPs contributing to MARGINAL status: (0..32) [0] 0
Policy parameter set has been changed
For the HP StorageWorks 4/256 SAN Director, HP StorageWorks DC SAN Backbone Director and HP
StorageWorks DC04 SAN Director Switch enterprise-class platforms, the command output includes
parameters related to CP blades.
Audit log configuration
When managing SANs you may want to filter or audit certain classes of events to ensure that you can view
and generate an audit log for what is happening on a switch, particularly for security-related event
changes if you are running a Fabric OS version earlier than v 6.0.0. These events include login failures,
zone configuration changes, firmware downloads, and other configuration changes—in other
words—critical changes that have a serious effect on the operation and security of the switch.
Important information related to event classes is also tracked and made available. For example, you can
track changes from an external source by the user name, IP address, or type of management interface used
to access the switch.