HP StorageWorks Fabric OS 6.1.x administrator guide (5697-0234, November 2009)

274 iSCSI Gateway services
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.34 Slot/Port: 3/ge4 Logical pn: 44"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:20
Port Index: 44
Share Area: No
Device Shared in Other AD: No
N 012d00; 3;50:06:06:9e:00:15:63:28;50:06:06:9e:00:15:63:29; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.35 Slot/Port: 3/ge5 Logical pn: 45"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:28
Port Index: 45
Share Area: No
Device Shared in Other AD: No
N 012e00; 3;50:06:06:9e:00:15:63:30;50:06:06:9e:00:15:63:31; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.36 Slot/Port: 3/ge6 Logical pn: 46"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:30
Port Index: 46
Share Area: No
Device Shared in Other AD: No
N 012f00; 3;50:06:06:9e:00:15:63:38;50:06:06:9e:00:15:63:39; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.37 Slot/Port: 3/ge7 Logical pn: 47"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:38
Port Index: 47
Share Area: No
Device Shared in Other AD: No
The Local Name Server has 11 entries }
5. Write down or copy and paste the WWN information, which you will use for the aliCreate
command.
To display the FC target WWNs for switches other than the 4/256 SAN Director, telnet into that switch
and run the nsShow command. Record the WWN information displayed.
6. Enter the aliCreate command to create zone aliases. Zone aliases are much easier to use than long
strings of WWN information. The two examples below create aliases for the FC virtual targets and for
the iSCSI virtual initiators:
switch:admin> alicreate ISCSI_TARGETS, "21:00:00:04:cf:e7:74:cf;
21:00:00:04:cf:e7:73:7e; 2f:ff:00:06:2b:0d:12:99"
switch:admin>
switch:admin> alicreate ISCSI_VI_SWITCH1_SLOT3, "50:06:06:9e:00:15:63:00;
50:06:06:9e:00:15:63:08; 50:06:06:9e:00:15:63:10; 50:06:06:9e:00:15:63:18;
50:06:06:9e:00:15:63:20; 50:06:06:9e:00:15:63:28; 50:06:06:9e:00:15:63:30;
50:06:06:9e:00:15:63:38"
7. Enter the cfgSave command to save the change to the defined configuration:
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y