HP StorageWorks Fabric OS 5.2.x administrator guide (5697-0014, November 2009)

32 Performing basic configuration tasks
4. You are finally prompted to specify the time zone region.
Synchronizing local time
You can synchronize the local time of the Principal or Primary Fabric Configuration Server (FCS) switch to
an external NTP server. It is suggested that you synchronize time with an external NTP server, as described
on ”How to synchronize local time with an external source” on page 32.
How to synchronize local time with an external source
1. Connect to the switch and log in with an account assigned to the admin role.
2. Enter the tsClockServer command:
where ipaddr is the IP address of the NTP server, which the switch must be able to access. This operand
is optional; by default this value is LOCL, which uses the local clock of the principal or primary switch
as the clock server.
Please select one of the following time zone regions.
1) Eastern Time
2) Eastern Time - Michigan - most locations
3) Eastern Time - Kentucky - Louisville area
4) Eastern Time - Kentucky - Wayne County
5) Eastern Time - Indiana - most locations
6) Eastern Time - Indiana - Crawford County
7) Eastern Time - Indiana - Starke County
8) Eastern Time - Indiana - Switzerland County
9) Central Time
10) Central Time - Indiana - Daviess, Dubois, Knox, Martin, Perry & Pulaski
11) Central Time - Indiana - Pike County
12) Central Time - Michigan - Dickinson, Gogebic, Iron & Menominee Counties
13) Central Time - North Dakota - Oliver County
14) Mountain Time
15) Mountain Time - south Idaho & east Oregon
16) Mountain Time - Navajo
17) Mountain Standard Time - Arizona
18) Pacific Time
19) Alaska Time
20) Alaska Time - Alaska panhandle
21) Alaska Time - Alaska panhandle neck
22) Alaska Time - west Alaska
23) Aleutian Islands
24) Hawaii
Enter number or control-D to quit ?18
The following information has been given:
United States
Pacific Time
Therefore TZ='America/Los_Angeles' will be used.
Local time is now: Thu May 11 07:39:37 PDT 2006.
Universal Time is now: Thu May 11 14:39:37 UTC 2006.
Is the above information OK?
Yes
No
Enter number or control-D to quit ?1
switch:admin> tsclockserver ipaddr
switch:admin> tsclockserver
LOCL
switch:admin> tsclockserver “132.163.135.131”
switch:admin> tsclockserver
132.163.135.131
switch:admin>