HP StorageWorks Fabric OS 5.2.x administrator guide (5697-0014, November 2009)

Fabric OS 5.2.x administrator guide 195
SAN Director 2/128 and 4/256 SAN Director: Use the following syntax:
urouteshow [
slot /][ portnumber ][, domainnumber ]
The following entries appear:
• Local Domain—Domain number of the local switch.
• In Ports—Port from which a frame is received.
• Domain—Destination domain of the incoming frame.
• Out Port—The port to which the incoming frame will be forwarded in order to reach the
destination domain.
• Name—The name of the destination switch.
• Path Count—The number of currently active paths to the destination domain
• Hops—The maximum number of switch-to-switch links (ISLs) transversed to reach the destination
domain.
• Flags—Indicates if the route is dynamic (D) or static (S). A static route is assigned using the
command uRouteConfig.
• Next (Dom, Port)Domain number and port number of the next hop.
The following example displays the routing information of all the active ports:
:
The next example displays the routing information for port 11 on slot 1:
This example displays the routing information of port 11 to domain 4 only:
switch:admin> urouteshow
Local Domain ID: 1
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
----------------------------------------------------------------------------
14 4 9 500 1 D 4,24
switch:admin>
switch:admin> urouteshow 1/11
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
----------------------------------------------------------------------------
11 2 0 1500 2 D 4,0
4 16 500 1 D 4,0
switch:admin> urouteshow 1/11, 4
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
----------------------------------------------------------------------------
11 4 16 500 1 D 4,0