Brocade Fabric Watch Administrator's Guide v6.1.0 (53-1000601-02, June 2008)

Fabric Watch Administrator’s Guide 67
53-1000601-02
Performance Monitor class
DRAFT: BROCADE CONFIDENTIAL
Performance Monitor class
Table 19 provides default settings for areas in the AL_PA Performance Monitor class.
NOTE
End-to-end and AL_PA CRC counters are not supported on the Brocade 200E switch, 4100 switch,
and 48000 director.
Table 20 provides default settings for areas in the Customer-Defined Performance Monitor class.
Table 21 provides default settings for areas in the End-to-End Performance Monitor class.
TABLE 19 AL_PA Performance Monitor class threshold defaults
Area Description Default threshold settings Default alarm
settings
Threshold state
AL_PA Invalid CRCs Monitors the number of
arbitrated loop physical
address CRC errors
Unit: Errors
Time Base: minute
Low: 0
High: 60
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
TABLE 20 Customer-defined Performance Monitor class threshold defaults
Area Description Default threshold settings Default alarm
settings
Threshold state
Customer-Defined Filter Monitors the
number of frames
that are filtered
out by the port
Unit: Frames
Time Base: none
Low: 0
High: 0
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Informative
Informative
TABLE 21 End-to-end Performance Monitor class threshold defaults
Area Description Default threshold settings Default alarm
settings
Threshold state
End-to-End Invalid CRC
Count
Monitors the number
of CRC errors
between a SID_DID
pair in a port
Unit: Errors
Time Base: minute
Low: 1
High: 10
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
End-to-End Receive
Performance
Monitors the
receiving traffic
between a SID_DID
pair in a port
Unit: KBps
Time Base: none
Low: 0
High: 0
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Informative
Informative
End-to-End Transmit
Performance
Monitors the
transmit traffic
between a SID_DID
pair in a port
Unit: KBps
Time Base: none
Low: 0
High: 0
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Informative
Informative