Brocade Fabric Watch Administrator's Guide (53-1000243-01, November 2006)

3-24 Fabric Watch Administrator’s Guide
Publication Number: 53-1000243-01
Configuring Fabric Watch Using Web Tools
3
Configuring Fabric Watch Using Web Tools
To configure Fabric Watch using Web Tools, see the Web Tools Administrator’s Guide.
Configuring Fabric Watch Using SNMP
To configure Fabric Watch using SNMP:
1. Open a MIB browser.
2. Load the appropriate MIB files. First, load the Brocade common MIB file (BRCD_v5_0.mib),
followed by the Brocade software MIB file (SW_v5_2.mib). If this is successful, the system
displays a screen similar to Figure 3-14.
Figure 3-14 Configuring Fabric Watch Using SNMP
In Figure 3-14, the MIB browser has populated the left side of the screen with a MIB tree that can be
navigated.
N
ote
The instructions given in this procedure apply to the AdventNet MIB browser. The procedure might
vary if you use other MIB browsers.