Brocade Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0 (53-1000602-01, October 2007)

ManualsBrandsHP ManualsStorageHP StorageWorks 4/256 SAN Director Switch

141

142

143

144

145

146

147

148

149

150

Fabric OS MIB Reference 131

53-1000602-01

swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1

See the Fabric OS Command Reference and the snmpMibCapSet command on how to enable or

disable the sending of traps from the various MIBs.

The swSsn variable is optional in trap messages.

The swGroupName, swGroupType, and swGroupMemPos variables are optional trap messages in

v2.6.x. The swGroupName, swGroupType, and swGroupMemPos variables are not supported in

Fabric OS v4.x and above.

Because FOS releases prior to v5.2.0 used to show the Enterprise Field in the swTraps from the

sysObjectID (set using config varaible "snmp.sysObjectID"), the Enterprise field will not always be

resolved to "sw". If the sysObjectID is changed by user the Enterprise field in the trap will show

some unresolved value.

To resolve this issue, beginning with the v5.2.0 release the SNMP configuration variable

snmp.trapEnterpriseFlag lets you define the way that the Enterprise field appears.

Select either the previous behavior in which the Enterprise field is taken from sysObjectID or the

new behavior in which the value in the Enterprise field will alway be "sw".

• Set the value of this variable to 0, to use the sysObjectID .

• Set the value to 1 to use the fixed enterprise value, "sw" (1.3.6.1.4.1.1588.2.1.1.1.) .

swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1

This trap is no longer generated.

Enterprise sw

Variables “swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20”

“swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10”

A swFault is generated whenever the diagnostics detect a fault with the switch.

“swFabricWatchTrap

1.3.6.1.4.1.1588.2.1.1.1.0.5” on

page 134

5 Threshold reached Fabric OS Command: fwConfigure

“swTrackChangesTrap

1.3.6.1.4.1.1588.2.1.1.1.0.6” on

page 135

6 Login/logout Fabric OS Command: trackChangesSet and

trackChangesShow

TABLE 13 SW MIB Traps (Continued)

Name Specific When Configure

#TYPE Switch is faulty.

#SUMMARY Faulty reason: %d and SSN is #%s

#ARGUMENTS 0, 1

#SEVERITY Critical

#TIMEINDEX 1

#STATE Nonoperational