Brocade Fabric OS MIB Reference - Supporting Fabric OS 5.3.0 (53-1000439-01, June 2007)

212 Fabric OS MIB Reference
53-1000439-01
connUnitNumSensors 1.3.6.1.3.94.1.6.1.14
8
If the switch is principal, this is set to 3 (yes); otherwise, for a fabric switch it is set to 2 (no). For a
Brocade Access Gateway device, since the switch is behaving as a device management tool and
not a Fibre Channel switch, the value is set to 1 (unknown).
Values Possible values are:
• unknown (1)
• no (2)
• yes (3)
connUnitNumSensors 1.3.6.1.3.94.1.6.1.14
Number of sensors (between 0 and maximum number of sensors) in the connUnitSensorTable.
See Table 14 on page 142 for specific sensor counts on the various switches.
connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15
The sysuptime time stamp (in centiseconds) at which the last status change occurred for any
members of the set; this is the latest time stamp that connUnitStatus or connUnitPortStatus
changed.
Not supported.
connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16
The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for
any members of the set. In other words, this is the latest time stamp of flash memory update. This
represents a union of change information for connUnitConfigurationChangeTime
Not supported.
connUnitNumRevs 1.3.6.1.3.94.1.6.1.17
The number of revisions in connUnitRevsTable.
Set to 2.
connUnitNumZones 1.3.6.1.3.94.1.6.1.18
Number of zones defined in connUnitZoneTable.
Not supported.