Brocade Fabric OS MIB Reference Guide v6.1.0 (53-1000602-02, June 2008)

12 Fabric OS MIB Reference

53-1000602-02

Fabric OS Commands for Configuring SNMP

Use the following commands to configure MIBs in the Fabric OS. Refer to the Fabric OS

Administrator’s Guide for procedures for configuring SNMP on the Brocade switches.

Support for Administrative Domains

Administrative Domains are supported in Fabric OS Version 5.3.0 and later releases. An

Administrative Domain (AD) is a domain within a fabric. Administrative domains can be used to limit

administrator access within a fabric, and to provide service providers with a means to assign

portions of a fabric to individual consumers. An AD may contain switches, devices, and ports. An AD

may also limit access to a configured set of users.

Support for Role Based Access Control

Role Based Access Control (RBAC) is supported in Fabric OS Version 5.3.0 and later releas RBAC

applies a fixed set of roles that address the access control needs of a majority of customers. Each

role is a set of permissions that can be applied to a user that controls the kinds of jobs and tasks

the user can perform on a fabric or fabric element.

Support for IP V6 Addressing

IP V6 addressing is supported in Fabric OS Version 5.3.0 and later releases.

TABLE 4 Commands for Configuring SNMP

Command Description

snmpConfig This command has all the features of the existing the agtcfg* commands; in

addition, it has SNMPv3 configuration parameters.

snmpMibCapSet Enhanced in Fabric OS v4.4 to provide a filter facility at the trap level (previously the

filter facility was at MIB level for traps).

Enhanced in Fabric OS 5.3.0 to support enabling and disabling of MIBs and traps

for the FCIP MIB and the ifTable and ifXTable for FC ports (MIB II Intefaces group).

snmpMibCapShow Displays the snmpMibCapSet command settings.

agtcfgDefault This command is deprecated.Only the snmpConfig command is working.

agtcfgSet This command is deprecated.Only the snmpConfig command is working.

agtcfgShow This command is deprecated.Only the snmpConfig command is working.

SNMPMibCapSet This command is deprecated.Only the snmpConfig command is working.

SNMPMibCapShow This command is deprecated.Only the snmpConfig command is working.