Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

844 Fabric OS Command Reference

53-1001186-01

zoneRemove

Removes a member from a zone.

Synopsis zoneremove "zonename", "zoneMemberList"

Description Use this command to remove one or more members from an existing zone.

If all members are removed, the zone is deleted.

This command changes the defined configuration. For the change to be preserved across switch

reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change

to become effective, enable the configuration with the cfgEnable command.

Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands The following operands are required:

"zonename" Specify the name of the zone from which to remove a member. Double

quotation marks are optional.

"zoneMemberList" Specify a member or a list of members to be removed from the specified

zone. The list must be enclosed in double quotation marks. Members must

be separated by semicolons. A member can be one or more of the following:

• A switch domain and port area or index pair: for example, "2,20". Use

switchShow for a list of valid port area or index numbers.

• A World Wide Name

• A zone alias name

Examples To remove “array2” from “Blue_zone”:

switch:admin> zoneremove "Blue_zone", "array2"

See Also zoneAdd, zoneCreate, zoneDelete, zoneShow