Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 335
53-1001186-01
haSyncStart
2
haSyncStart
Enables High Availability state synchronization.
Synopsis hasyncstart
Description Use this command to enable the High Availability (HA) state synchronization.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command
Availability” for details.
Examples To enable the HA state synchronization:
switch:admin> hasyncstart
HA State synchronization has started
See Also haFailover, haShow, haSyncStop