HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

350 Administering Advanced Performance Monitoring
AL_PA of the SIDs and DIDs for frames transmitted from and received by the
port.
Figure 29 shows the mask positions in the command. A mask (“ff”) is set on slot 1, port 2 to compare the
AL_PA fields on the SID and DID in all frames (transmitted and received) on port 2. The frame SID and DID
must match only the AL_PA portion of the specified SID-DID pair. Each port can have only one EE mask.
The mask is applied to all end-to-end monitors on the port. Individual masks for each monitor on the port
cannot be specified.
Figure 29 Mask positions for end-to-end monitors
On FC4-48 port blades, the upper 32 ports can be addressed only when the area ID and the AL_PA are
used together. For usability concerns, the area ID and the AL_PA cannot be masked separately for any
ports on FC4-48 port blades.
End-to-end masks are not supported on the DC Director.
Deleting end-to-end monitors
To delete an end-to-end monitor:
1. Enter the perfShowEEMonitor command to list the valid monitor numbers for a port.
2. Enter the perfDelEEMonitor command to delete a specific monitor.
If you do not specify which monitor number to delete, you are asked if you want to delete all entries.
The following example displays the end-to-end monitors on port 0 using the perfShowEEMonitor
command (the monitor numbers are listed in the KEY column) and deletes monitor number 2 on port 0
using the perfDelEEMonitor command:
switch:admin> perfshoweemonitor 0
There are 4 end-to-end monitor(s) defined on port 0.
KEY SID DID OWNER_APP TX_COUNT RX_COUNT
OWNER_IP_ADDR
---------------------------------------------------------------------------
0 0x000024 0x000016 WEB_TOOLS 0x0000000000000000 0x0000000000000000
10.106.7.179
1 0x000022 0x000033 WEB_TOOLS 0x0000000000000000 0x0000000000000000
10.106.7.179
2 0x000123 0x000789 WEB_TOOLS 0x0000000000000000 0x0000000000000000
10.106.7.179
3 0x001212 0x003434 WEB_TOOLS 0x0000000000000000 0x0000000000000000
10.106.7.179
switch:admin> perfdeleemonitor 0, 2
End-to-End monitor number 2 deleted
switch:admin>
perfsetporteemask 1/2, "00:ff:ff" "00:ff:ff" "00:ff:ff" "00:ff:ff"
SID mask DID mask
Transmitted from port
Received by port
AL_PA mask
Area ID mask
Domain ID mask
SID mask DID mask