HP StorageWorks Fabric OS 5.X MIB Reference Guide (AA-RVHXB-TE, September 2005)

78 FE MIB objects
fcFxPortClass3SeqDeliv
OID 1.3.6.1.2.1.75.1.1.5.1.13
Description A flag indicating whether Class 3 Sequential Delivery is supported by the Fx_Port.
Other Fx_Port parameters
fcFxPortHoldTime
OID 1.3.6.1.2.1.75.1.1.5.1.14
Description The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the
frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not
support this parameter.
fcFeStatus group
This group consists of tables that contain operational status and established service parameters for the FE
and the attached Nx_Ports.
Fx_Port status table
This table contains the operational status and parameters of the Fx_Ports, one entry for each Fx_Port.
fcFxPortStatusTable
OID 1.3.6.1.2.1.75.1.2.1
Description A table that contains operational status and parameters of the Fx_Ports, one entry for
each Fx_Port in the FE.
fcFxPortStatusEntry
OID 1.3.6.1.2.1.75.1.2.1.1
Description An entry containing operational status and parameters of an Fx_Port.
Index fcFeModuleIndex
fcFxPortIndex
fcFxPortID
OID 1.3.6.1.2.1.75.1.2.1.1.1
Description The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port
might assign its address identifier to its attached Nx_Ports during fabric login.
fcFxPortBbCreditAvailable
OID 1.3.6.1.2.1.75.1.2.1.1.2
Description The number of buffers currently available for receiving frames from the attached port in
the buffer-to-buffer flow control. The value should be less than or equal to
fcFxPortBbCredit.