HP StorageWorks Fabric OS 5.3.x administrator guide (5697-0244, November 2009)

338 Administering Advanced Performance Monitoring (APM)
Table 72 lists commands associated with Advanced Performance Monitoring. Advanced Performance
Monitor commands are available only to users with the admin or switchAdmin roles. For detailed
information on these commands, refer to the Fabric OS Command Reference Manual.
NOTE: The command examples in this chapter use the slot/port syntax required by SAN Director 2/128
and 4/256 SAN Director. For 4/16 SAN Switch and 4/8 SAN Switch, Brocade 4Gb SAN Switch for HP
p-Class BladeSystem, Brocade 4Gb SAN Switch for HP c-Class BladeSystem, SAN Switch 2/8V, SAN
Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32, SAN Switch 4/32B, 4/64 SAN Switch and 400 MP
Router switches, use only the port number where needed in the commands.
Table 72 APM commands
Command Description
perfAddEEMonitor Add an end-to-end monitor to a port.
perfAddIPMonitor Add an IP monitor to a port.
perfAddReadMonitor Add a SCSI Read monitor to a port.
perfAddRwMonitor Add a SCSI Read and Write monitor to a port.
perfAddSCSIMonitor Add a SCSI traffic frame monitor to a port.
perfAddUserMonitor Add a filter-based monitor to a port.
perfAddWriteMonitor Add a SCSI Write monitor to a port.
perfCfgClear Clear the performance monitoring settings from nonvolatile
(flash) memory.
perfCfgRestore Restore performance monitoring settings from nonvolatile (flash)
memory.
perfCfgSave Save the current performance monitoring settings to nonvolatile
(flash) memory.
perfClearAlpaCrc Clear an AL_PA device CRC count by the port and AL_PA.
perfClearEEMonitor Clear end-to-end monitor counters on a port.
perfClearFilterMonitor Clears filter-based monitor counters.
perfDelEEMonitor Delete an end-to-end monitor on port.
perfDelFilterMonitor Delete a filter-based monitor.
perfMonitorClear Clear statistics counters of end-to-end, filter-based, and ISL
monitors on a port.
perfMonitorShow Display end-to-end, filter-based, and ISL monitors on a port.
perfSetPortEEMask Set overall mask for end-to-end (EE) monitors.
perfShowAlpaCrc Display the AL_PA CRC count by port or by AL_PA.
perfShowEEMonitor Show user-defined end-to-end monitors.
perfShowFilterMonitor Show filter-based monitors.
perfShowPortEEMask Display the current end-to-end mask of a port.