Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010)

Fabric OS MIB Reference 199

53-1001768-01

swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5

Get end-to-end count of Fibre Channel words (FCW) transmitted by the port that matched the

SID-DID pair.

swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6

Gets DID information by reference number.

swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7

Gets SID information by reference number. SID (Source Identifier) is a 3-byte field in the frame

header used to indicate the address identifier of the N_Port from which the frame was sent.

swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3

Filter-based monitoring counter.

swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1

Filter-based monitoring counter for given port.

Index swBlmPerfFltPort, swBlmPerfFltRefkey

swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1

This object identifies the port number of the switch.

swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2

This object identifies the reference number of the filter. This reference number is assigned when a

filter is created. In the SNMP Index, start with one instead of 0, add one to actual reference key.

swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3

Get statistics of filter-based monitor. Filter-based monitoring provides information about a filter hit

count, such as:

• Read command

• SCSI or IP traffic

• SCSI Read/Write