Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

106 Web Tools Administrator’s Guide
53-1000606-01
Managing zone configurations
8
FIGURE 47 Sample zoning database
Creating zone configurations
Use the following procedure to create a zone configuration. After creating a zone configuration, you
must explicitly enable it for it to take effect.
NOTE
Any changes made to the currently enabled configuration will not appear until you reenable the
configuration.
1. Open the Zone Administration window as described on page 96.
2. Select a format to display zoning members in the Member Selection List as described in
“Select a zoning view” on page 100.
3. Click the Zone Config tab and click New Zone Config.
4. On Create New Config, type a name for the new configuration and click OK.
The new configuration appears in the Name drop-down list.
5. Expand the Member Selection List to view the nested elements.
The choices available in the list depend on the selection made in the View menu.
6. Select an element in the Member Selection List that you want to include in your configuration.
The Add Member button becomes active.
Zone Configuration: myconfig
WWN 5
Alias 3
WWW 5; WWN 6; WWN7
Alias 4
Zone B
Other Elements
WWW 9
WWN 1; WWN 2; WWN 3
Alias 1
WWN 4; <domain, portarea>
Alias 2
Zone A
<domain, portarea>
Other Elements