Brocade Network Advisor Documentation Updates v11.1.x (53-1002363-03, August 2011)

60 Brocade Network Advisor Documentation Updates
53-1002363-02
Database tables and fields
E
LAST_UPDATE_TIME 1 = the Management application server is registered
with the switch to receive Syslog.
Default is ’now()’.
timestamp
SYSLOG_REGISTERED 1 = Syslog is enabled for this switch.
Default value is 0.
smallint
CALL_HOME_ENABLED 1 = call home is enabled for this switch.
Default value is 1.
smallint
SNMP_REGISTERED 1 = the Management application server is registered
with the switch to receive SNMP traps.
Default value is 0.
smallint
USER_IP_ADDRESS User-assigned IP address. This is used for M-EOS
switches where Fabric OS seed switch fails to get the
IP address of the M-EOS switch.
varchar 128
NIC_PROFILE_ID NIC profile of the Management application server
host used by this switch to communicate in
interactive configuration and other operations. It
determines which Management application host IP
used by this switch.
int
MANAGING_SERVER_IP_
ADDRESS
IP address(v4/v6) of the Management applciation
server which is currently managing the M-model
switch. Used for M-EOS switch only. It does not apply
to Fabric OS switches.
varchar 128
VF_ENABLED Default value is 0. smallint
VF_SUPPORTED Default value is 0 smallint
MANAGED_ELEMENT_ID A unique managed element ID for this physical
switch. Also a foreign key reference to the
MANAGED_ELEMENT table.
int
NAT_PRIVATE_IP_ADDRESS NAT private IP Address. Feature available from NMS
DC Eureka release onwards. During a successful NAT
translation the Private IP that gets translated will be
stored in this field. The new translated IP Address will
be stored in the existing IP_ADDRESS field. All the
NAT look up will be done using the NAT Private IP
Address.
varchar 128
ALTERNATE_IP_ADDRESS Alternate IP address of the switch. Feature available
from Eureka release onwards. During fabric discovery
the column will be populated based on the values in
the fabricinfo.html. If Management applciation server
is IPV6 capable, then we store the switchetherIP NVP
else we store the switchetherIPV6. So could be either
IPV4 or IPV6 address. If there exists any NAT
translation, translated IP will be used.
varchar 128
TABLE 94 CORE_SWITCH (Continued)
Field Definition Format Size