Brocade Network Advisor Documentation Updates v11.1.x (53-1002363-03, August 2011)

Brocade Network Advisor Documentation Updates 165
53-1002363-02
Database tables and fields
E
BOOT_SPEED The default value is 0. int
BOOT_TOPOLOGY The default value is 1. int
BB_CREDIT The maximum number of receive buffer.
The default value is 8.
int
FRAME_DATA_FIELD_SIZE The default value is 512. int
HARDWARE_PATH Indicates whether MPIO is enabled or disabled
V_PORT_COUNT Number of logical ports.
The default value is 0.
int
QUEUE_DEPTH The number of I/O operations that can be run in
parallel on a device.
The default value is 0.
int
INTERRUPT_CONTROL_COA
LESCE
Indicates whether interrupt control is on or off.
The default value is 0.
smallint
INTERRUPT_CONTROL_LAT
ENCY
Sets the interrupt control latency value..
The default value is 0.
int
INTERRUPT_CONTROL_DEL
AY
Sets the interrupt control delay value..
The default value is 0.
int
BEACON_STATE Indicates whether beaconing is on or off..
The default value is 0.
smallint
LINK_BEACON_STATE Indicates whether link beaconing is on or off..
The default value is 0.
smallint
MPIO_MODE_STATE Indicates whether multipathing mode is on or off..
The default value is 0.
smallint
PATH_TIME_OUT
The value between 0 to 60 that specifies the time out
session. Note you can only enable or edit the path
time out when MPIO is disabled.
The default value is 0.
int
LOGGING_LEVEL
The port logging level. Values include Log Critical, Log
Error, Log Warning, and Log Info. The default value is
0.
smallint
TARGET_RATE_LIMIT The default value is 0. smallint
DEFAULT_RATE_LIMIT The default value is 0. int
VF_MODE The default value is 0. smallint
RECIEVE_BUFFER_CREDIT The default value is 48. varchar 64
TRANSMIT_BUFFER_CREDI
T
The default value is 8.
varchar 64
TABLE 320 HBA_PORT_DETAIL (Continued)
Field Definition Format Size