Brocade Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0 (53-1000602-01, October 2007)

Fabric OS MIB Reference 57
53-1000602-01
fcFeModuleTable 1.3.6.1.2.1.75.1.1.4
3
Value The valid value for all Brocade switches is 1.
fcFeModuleTable 1.3.6.1.2.1.75.1.1.4
A table that contains information about the modules, one entry for each module in the fabric
element.
fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1
An entry containing the configuration parameters of a module.
Index 1: fcFeModuleIndex
fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1
Identifies the module within the fabric element for which this entry contains information. This value
is never greater than fcFeModuleCapacity. This entry never shows any value as it is shown as non
accessible in the browser.
fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2
A textual description of the module. This value should include the full name and version
identification of the module. It should contain printable ASCII characters.
See “sysDescr 1.3.6.1.2.1.1.1” on page 18.
fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3
The vendor’s authoritative identification of the module. This value might be allocated within the
SMI enterprises subtree (1.3.6.1.4.1) and provides a straightforward and unambiguous means for
determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe Inc.” was
assigned the subtree 1.3.6.1.4.1.99649 and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to
its “FeFiFo-16 PlugInCard.”
See “sysObjectID 1.3.6.1.2.1.1.2” on page 19.
fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4
Indicates the operational status of the module.
Values 1 - online, module functioning properly
2 - offline, module not available
3 - diagnostics, module in test mode
4 - faulty, module is defective