Brocade Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0 (53-1000602-01, October 2007)

130 Fabric OS MIB Reference
53-1000602-01
sw Traps
5
sw Traps
This section contains descriptions and other information that is specific to sw Traps.
See Table 13 for the six traps defined in the SW.MIB, when it occurs, and how to configure the trap,
if possible.
SwFwStatus Integer Status for thresholds:
1 disabled
2 enabled
SwFwEvent Integer Possible events available:
1 started
2 changed
3 exceeded
4 below
5 above
6 inBetween
SwFwBehavior Integer Behavior type for thresholds:
1 triggered
2 continuous
SwFwState Integer State type for last events:
1 swFwInformative
2 swFwNormal
3 swFwfaulty
SwFwLicense Integer License state:
1 swFwLicensed
2 swFwNotLicensed
TABLE 12 SW-MIB Textual Conventions (Continued)
Type Definition Value Description
TABLE 13 SW MIB Traps
Name Specific When Configure
“swFault
1.3.6.1.4.1.1588.2.1.1.1.0.1” on
page 131
(not supported)
1 During boot, if diagnostics fail N.A.
“swSensorScn
1.3.6.1.4.1.1588.2.1.1.1.0.2” on
page 132
2Obsolete N.A.
“swFCPortScn
1.3.6.1.4.1.1588.2.1.1.1.0.3” on
page 132
3 Port changes state Always on
“swEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.4” on
page 133
4 Switch event See the Fabric OS Command Reference and
the snmpConfig command for more
information.