Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

302 Fabric OS Message Reference
53-1000437-01
NS-1004
50
Recommended
Action
To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload
so that the active and standby CPs have the same firmware version.
Reduce the local device count to follow the capability of the lowest version of firmware.
Severity INFO
NS-1004
Message <timestamp>, [NS-1004], <sequence-number>,, INFO, <system-name>, Number of local
devices <Current local device count>, exceeds the standby can support <Local
device count that standby can support>, can't sync.
Probable Cause Indicates that the name server on the standby CP has lower supported capability than the active
CP due to different firmware versions running on the active and standby CPs. This means that the
active and standby CPs are out of sync. Any execution of the haFailover or firmwareDownload
commands will be disruptive.
Recommended
Action
To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload
so that the active and standby CPs have the same firmware version.
Reduce the local device count to follow the capability of the lowest version of firmware.
Severity INFO