Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 485
53-1001157-01
Chapter
79
SS System Messages
SS-1000
Message <timestamp>, [SS-1000], <sequence-number>,, INFO, <system-name>, supportSave has
uploaded support information to the host with IP address <host ip>.
Probable Cause Indicates the supportSave command was used to transfer support information to a remote
location.
Recommended
Action
No action is required.
Severity INFO
SS-1001
Message <timestamp>, [SS-1001], <sequence-number>,, WARNING, <system-name>, supportSave's
upload operation to host IP address <host ip> aborted.
Probable Cause Indicates a file copy error occurred during execution of the supportSave command. Complete error
information cannot always be displayed in this message due to possible errors in subcommands
being executed by the supportSave command.
Recommended
Action
Check the remote server settings. Run the supportFtp command to set the FTP or SCP parameters.
After the problem is corrected, rerun the supportSave command.
Severity WARNING
SS-1002
Message <timestamp>, [SS-1002], <sequence-number>,, INFO, <system-name>, supportSave has
stored support information to the USB storage device.
Probable Cause Indicates the supportSave command was used to transfer support information to an attached USB
storage device.
Recommended
Action
No action is required.
Severity INFO