Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

65-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
TRCE-1003
65
TRCE-1003
Message
Probable
Cause
Indicates that a trace dump has been created on the switch or the indicated slot but is not automatically
transferred from the switch due to an FTP error, such as a wrong FTP address, FTP site down, or
network down.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
TRCE-1004
Message
Probable
Cause
Indicates that trace dump files have been created on the switch or the indicated slot but are not
automatically transferred from the switch because auto-FTP is disabled.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity WAR NIN G
TRCE-1005
Message
Probable
Cause
Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong FTP
address, an FTP site down, or the network being down.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Note: You can also run the traceFtp -e command to enable auto-FTP.
Severity ERROR
<timestamp>, [TRCE-1003], <sequence-number>,, ERROR, <system-name>,
Trace dump< optional slot indicating on which slot the dump occurs >
was not transferred due to FTP error.
<timestamp>, [TRCE-1004], <sequence-number>,, WARNING, <system-
name>, Trace dump< optional slot indicating on which slot the dump
occurs > was not transferred because trace auto-FTP disabled.
<timestamp>, [TRCE-1005], <sequence-number>,, ERROR, <system-name>,
FTP Connectivity Test failed due to error.