Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 33-1
Publication Number: 53-1000242-01
Chapter
33
ICPD System Messages
ICPD-1001
Message
Probable
Cause
Indicates that the specified function failed to allocate memory.
Recommended
Action
Check memory usage on the switch using the memShow command.
Reboot or power cycle the switch.
Severity ERROR
ICPD-1002
Message
Probable
Cause
Indicates that an initialization of a module within the ICPD failed.
Recommended
Action
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Command Reference for more information on this command.
Severity ERROR
ICPD-1003
Message
Probable
Cause
Indicates that iSCSI configuration has been committed by a remote switch in the fabric.
<timestamp>, [ICPD-1001], <sequence-number>,, ERROR, <system-name>,
Failed to allocate memory: (<function name>).
<timestamp>, [ICPD-1002], <sequence-number>,, ERROR, <system-name>,
Failed to initialize <module> rc = <error>.
<timestamp>, [ICPD-1003], <sequence-number>,, INFO, <system-name>,
iSCSI configuration has been committed by switch (<domain id>).