Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

572 Fabric OS Command Reference

53-1001186-01

portCfgNPIVPort

Examples To enable NPIV functionality on a port:

switch:admin> portcfgnpivport 1/3 1

To display NPIV functionality on a port:

switch:admin> portcfgshow

Ports of Slot 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

-----------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+--+--

Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN

AL_PA Offset 13 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON

Long Distance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

VC Link Init .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Locked L_Port .. .. .. .. .. .. .. .. .... .. .. .. .. .. ..

Locked G_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Disabled E_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

ISL R_RDY Mode .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

RSCN Suppressed .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Persistent Disable.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

NPIV capability .. .. .. ON .. .. .. .. .. .. .. .. .. .. .. ..

QOS E_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

EX Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Mirror Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Rate Limit .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Credit Recovery .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

where AN:AutoNegotiate, ..:OFF, ??:INVALID. LM:L0.5

(output from other ports suppressed)

To disable NPIV functionality on a port:

switch:admin> portcfgnpivport 1/3 0

See Also configure, portCfgDefault, portCfgShow