Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 517

53-1001186-01

perfSetPortEEMask

TxSIDMsk Specify the transmitting source ID mask in dd:aa:pp format, with quotation

marks, where dd is the domain ID mask, aa is the Area ID mask, and pp is

AL_PA ID mask. For example, "00:ff:00" uses only the Area ID to trigger the EE

monitor.

Specify the following values to turn a specific field on or off:

00 Specifies that the field does not trigger EE monitors.

ff Specifies that the field does triggers EE monitors.

TxDIDMsk Specify the transmitting Destination ID mask, in quotation marks, in dd:aa:pp

format.

RxSIDMsk Specify the receiving Source ID mask, in quotation marks, in dd:aa:pp format.

RxDIDMsk Specify the destination ID mask, in quotation marks, in dd:aa:pp format

Examples To set the overall mask for end-to-end monitors on a port:

switch:admin> perfsetporteemask 1/6 "00:00:00" "ff:ff:ff" "00:ff:ff" "ff:00:00"

Changing EE mask for this port will cause ALL EE monitors on this port to be

deleted.

continue? (yes, y, no, n): [no] y

The EE mask on port 6 is set and EE Monitors on this port are deleted

See Also perfAddEEMonitor, perfShowPortEEMask