Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 331

53-1001186-01

haEnable

Enables the High Availability feature.

Synopsis haenable

Description Use this command to enable the High Availability (HA) feature on a switch. If the HA feature is

already enabled, this command does nothing.

Note The execution of this command is subject to Virtual Fabric or Admin Domain Restrictions that may

be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command

Availability” for details.

Operands none

Examples To enable the High Availability feature:

switch:admin> haenable

HA is enabled