Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

290 Fabric OS Command Reference
53-1001186-01
firmwareKeyUpdate
2
user Specify a user name for FTP or SSH server access. This operand can be
omitted, if the firmware key is accessible on a local directory or by anonymous
FTP server access. A user name other than “anonymous” is required for SSH
server access.
keyfile Specify a fully qualified path for the firmware keyfile. Absolute path names
may be specified using forward slashes (/). When updating from a USB
device, the keyfile must reside in the
/firmwarekey directory on the USB
device.
passwd Specify a password. This operand can be omitted, if firmware is accessible
through a local directory or an attached USB device, or if no password is
required by the FTP server. This operand is required when accessing an SSH
server.
Examples To update the public key from a server, using an automatically determined transfer protocol:
switch:admin> firmwarekeyupdate 192.168.21.34,johndoe,/pub/dist/pubkey.pem,12345
Updating the public key, please wait...
Public key successfully updated.
To update the public key using the interactive method:
switch:admin> firmwarekeyupdate
Server Name or IP Address: 192.168.21.34
User Name: johndoe
File Name: /pub/dist/pubkey.pem
Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]:
Password:
Updating the public key, please wait...
Public key successfully updated.
To update the public key from an external USB device:
switch:admin>firmwarekeyupdate -U /usb/usbstorage/brocade/firmwarekey/pubkey.pem
Updating the public key, please wait...
Public key successfully updated.
See also firmwareDownload, firmwareKeyShow, configure