Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 179

53-1001186-01

dlsReset

Disables the dynamic load sharing (DLS) option.

Synopsis dlsreset

Description Use this command to turn off DLS when a fabric change occurs. Refer to dlsSet for a full

description of load sharing.

This command should be used only if devices connected to the fabric cannot handle occasional

routing changes correctly.

Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing

policies.

Operands none

Examples To disable the dynamic load sharing option:

switch:admin> dlsreset

Committing configuration...done.

switch:admin> dlsshow

DLS is not set