Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 649
53-1000599-02
switchStatusPolicyShow
2
switchStatusPolicyShow
Displays the policy parameters that determine overall switch status.
Synopsis switchstatuspolicyshow
Description Use this command to view the current policy parameters set for the switch. These policy
parameters determine the number of failed or non-operational units allowed for each contributor
before triggering a status change in the switch.
The command displays the current parameters in a three-column format similar to what is shown in
Table 21. The first column indicates the contributor, the second column indicates the minimum
number that contributes to the DOWN status, and the third column indicates the minimum number
that contributes to the MARGINAL status. The parameters can be set by the switchStatusPolicySet
command. The existence of policies such as Fans, PowerSupplies, CP, WWN, and Blade may differ
from platform to platform.
The policy parameters determine the number of failed or non-operational units for each contributor
that trigger a status change in the switch. For example, if the FaultyPorts DOWN parameter is set to
3, and three ports fail in the switch, then the status of the switch changes to DOWN.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples
switch:admin> switchstatuspolicyshow
The current overall switch status policy parameters:
Down Marginal
----------------------------------
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
TABLE 21 Example of contributor, values, and status
Contributor DOWN MARGINAL
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0