Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 573
53-1000599-02
secPolicyCreate
2
"member" Specify one or more members to be included in the security policy. The
member list must be enclosed in double quotation marks and members
separated by semicolons. The member list must be separated from the name
field by a comma and a space. Depending on the policy type, members are
specified as follows:
DCC_POLICY Members
The DCC_Policy_nnn is a list of devices associated with a specific switch and
port index combination. An empty DCC_POLICY does not stop access to the
switch. The device is specified by its port WWN. The switch and port
combination must be in the switch port format
switch can be specified using a WWN, domain, or switch name.
port can be specified by port numbers separated by commas and enclosed in
either brackets or parentheses: for example, (2, 4, 6). Ports enclosed in
brackets include the devices currently attached to those ports.
The following examples illustrate several ways to specify the port values:
(1-6) Selects ports 1 through 6.
(*) Selects all ports on the switch.
[3, 9] Selects ports 3 and 9 and all devices attached to those ports.
[1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those
ports.
[*] Selects all ports on the switch and devices currently attached to
those ports.
SCC_POLICY and FCC_POLICY Members
This policy type requires member IDs to be specified as WWN strings,
domains, or switch names. If domain or switch names are used, the switches
associated must be present in the fabric or the command fails.
To add all switches in the current fabric as members of the policy, enter an
asterisk enclosed in quotation marks (*) as the member value. This feature
cannot be used by the other security commands.
Examples To create an FCS policy:
primaryfcs:admin> secpolicycreate "FCS_POLICY", "3; 4"
FCS_POLICY has been created.
While creating the FCS policy, the local switch WWN is automatically included in the list.
Switches included in the FCS list are FCS switches and the remaining switches in the fabric are
non-FCS switches. Out of the FCS list, the switch that is in the first position becomes the
Primary FCS switch and the remaining switches become backup FCS switches. If the first
switch in the FCS list is not reachable, the next switch becomes the Primary.
To create a device policy to allow two devices to attach to domain 3 ports 1 and 3 (the WWN of first
device is 11:22:33:44:55:66:77:aa and the WWN of second device is 11:22:33:44:55:66:77:bb):
primaryfcs:admin> secpolicycreate "DCC_POLICY_aB_7",
"11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3[1,3]"
DCC_POLICY_abc has been created.