Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 537
53-1000599-02
portSwapEnable
2
portSwapEnable
Enables the portswap feature.
Synopsis portswapenable
Description Use this command to enable the portswap feature. The portSwap command cannot be used unless
the feature is first enabled with this command.
The enabled state of the portswap feature is persistent across reboots and power cycles.
Enabling or disabling the portswap feature does not affect previously performed portswap
operations.
Note The execution of this command is subject to Admin Domain restrictions that may be in place.Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To enable the portswap feature:
switch:admin> portswapenable
See Also portSwap, portDisable, portEnable, portShow, portSwapDisable, portSwapShow, switchShow