Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

236 Fabric OS Command Reference
53-1000599-02
fwMailCfg
2
fwMailCfg
Displays and configures Fabric Watch email alerts.
Synopsis fwmailcfg
Description Use this command to display or modify the configuration and status of the Fabric Watch email alert
in the switch.
Switch elements monitored by Fabric Watch are divided into classes, and email alerts are based on
the classes. Each class can configure one email address as the alert message's receiver.
For an email alert to function correctly, add the CP0 and CP1 IP addresses and hostnames to DNS
and also set the domain name and name server. The ipAddrShow and dnsConfig commands can
be used to set and check this information.
Notes This command requires a Fabric Watch license.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To configure email settings:
switch:admin> fwmailcfg
1 : Show Mail Configuration Information
2 : Disable Email Alert
3 : Enable Email Alert
4 : Send Test Mail
5 : Set Recipient Mail Address for Email Alert
6 : Relay Host IP Configuration
7 : Quit
Select an item => : (1..7) [7]1
Config Show Menu
--------------------------------------
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
8 : End-to-End Performance Monitor class
9 : Filter Performance Monitor class
10 : Security class
11 : Resource class
12 : FRU Class
13 : Quit
Select an item => : (0..13) [11] 1
mail configuration information
--------------------------------------------
Email Alert = disable
Mail Recipients = NONE
--------------------------------------------