Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 119
53-1000599-02
dnsConfig
2
dnsConfig
Sets, displays, or removes domain name service (DNS) parameters.
Synopsis dnsconfig
Description Use this command to display, set, or remove the domain name service parameters.
The domain name service parameters are the domain name and the name server IP address for
primary and secondary name servers. The dnsconfig command displays IPv4 and IPv6 addresses.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To set the DNS parameters for the system:
switch:admin> dnsconfig
Enter option
1 Display Domain Name Service (DNS) configuration
2 Set DNS configuration
3 Remove DNS configuration
4 Quit
Select an item: (1..4) [4] 2
Enter Domain Name: [] domain.com
Enter Name Server IP address in dot notation: [] 123.123.123.123
Enter Name Server IP address in dot notation: [] 123.123.123.124
DNS parameters saved successfully
Enter option
1 Display Domain Name Service (DNS) configuration
2 Set DNS configuration
3 Remove DNS configuration
4 Quit
Select an item: (1..4) [4] 4
See Also configDownload, configUpload, firmwareDownload, ipAddrSet, ipAddrShow