Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

172 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
show debug-log-parameters
Description
Note – This command should only be used by service technicians, or with the
advice of a service technician.
Shows which debug message types are enabled (on) or disabled (off) for inclusion
in the Storage Controller debug log.
Input
Output
show debug-log-parameters
Field Description
host Host interface debug messages
disk Disk interface debug messages
mem Internal memory debug messages
fo Failover/recovery debug messages
msg Inter-controller message debug messages
fca FC only. I/O interface driver debug messages (standard)
fcb FC only. I/O interface driver debug messages (resource counts)
fcc FC only. I/O interface driver debug messages (upper layer, verbose)
fcd FC only. I/O interface driver debug messages (lower layer, verbose)
ioa iSCSI and SAS only. I/O interface driver debug messages (standard)
iob iSCSI and SAS only. I/O interface driver debug messages (resource counts)
ioc iSCSI and SAS only. I/O interface driver debug messages (upper layer,
verbose)
iod iSCSI and SAS only. I/O interface driver debug messages (lower layer,
verbose)
misc Internal debug messages
rcm Removable-component manager debug messages