Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

138 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
set led
Description
Changes the state of drive module or enclosure LEDs to help you locate devices.
For LED descriptions, see the user guide.
Input
Example
Identify drive module 5 in the controller enclosure.
Stop identifying the controller enclosure.
set led disk|enclosure ID on|off
Parameter Description
disk ID Specifies a disk drive number. For the syntax to use, see “Disk
Drive Syntax” on page 25.
enclosure ID Specifies the enclosure number, where 0 represents the controller
enclosure and the number increments for each attached drive
enclosure.
on|off Specifies to set or unset the LED.
# set led disk 0.5 on
Success: Enabling identification LED for disk 0.5...
# set led enclosure 0 off
Success: Disabling identification LED for enclosure 0...