Manualshelf

Data Center Fabric Manager Professional User Manual - Supporting DCFM 10.3.x (53-1001355-01, October 2009)

ManualsBrandsHP ManualsStorageHP StorageWorks 16-Port SAN Switch 4/32
471472473474475476477478479480
448 DCFM Professional User Manual
53-1001355-01
Copying the local CA certificate
A
Copying the local CA certificate
1. Select the Security tab.
2. Select Local CAs under Certificates & CAs.
3. Select the name of the local CA from the Local Certificate Authority list.
The CA Certificate Information is displayed.
4. Copy the key contents, beginning with
---BEGIN CERTIFICATE REQUEST--- and ending with
---END CERTIFICATE REQUEST---
. Be careful not to include any extra characters.
This certificate data will be transferred to other HP SKM appliances in “Adding an HP SKM
appliance to a cluster”.
Keep this browser window open while going on to “Adding an HP SKM appliance to a cluster”.
Adding an HP SKM appliance to a cluster
1. Open a new browser window, while keeping the browser window from“Copying the local CA
certificate” open.
2. Log in to the HP SKM Key Manager console of the HP SKM appliance that is being added.
3. Select the Security tab.
4. Select Known CAs under Certificates & CAs.
The Certificate and CA Configuration page is displayed.
5. Type the certificate name in the Certificate Name field under Install CA certificate.
6. Paste the certificate data you copied previously in the “Copying the local CA certificate”
procedure. If you kept the browser window open as suggested in “Copying the local CA
certificate”, the same data is available in that browser window.
7. Select Install.
8. From the HP SKM key manager main page, select the Device tab.
9. Select Cluster under Device Configuration.
10. Select Join Cluster.
11. Type the original cluster member’s IP address into Cluster Member IP. This is the IP address
designated as the local IP address that you recorded for this step in “Creating an SKM Key
vault High Availability cluster”
12. Browse to the location of the temporary cluster key file that you copied in “Creating an SKM
Key vault High Availability cluster” for the Cluster Key File.
13. Type the cluster password you recorded in “Creating an SKM Key vault High Availability cluster”
as the Cluster Password.