Data Center Fabric Manager Professional User Manual - Supporting DCFM 10.3.x (53-1001355-01, October 2009)

294 DCFM Professional User Manual
53-1001355-01
Duplicating an LLDP profile
11
7. Click OK.
The CEE Confirmation and Status dialog box displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
Duplicating an LLDP profile
When you duplicate an LLDP profile, you also duplicate the parameters that belong to that LLDP
Profile.
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the LLDP-DCBX tab on the Edit Switch dialog box.
The LLDP Profile dialog box displays.
4. Select an existing LLDP Profile from the LLDP Profiles table in the upper right pane.
NOTE
You cannot duplicate <Global Configurations>. You can, however, edit global configurations.
For more information, see “Editing an LLDP profile” on page 293.
5. Click Duplicate.
An input dialog pops up if the duplicated map exceeds the maximum length.
If the map does not exceed the maximum length, a copy of the LLDP profile displays in the
LLDP Profiles table.
6. Click OK.
The CEE Confirmation and Status dialog box displays.
7. Review the changes carefully before you accept them.
8. Click Start to apply the changes, or click Close to abort the operation.