Data Center Fabric Manager Professional User Manual - Supporting DCFM 10.3.x (53-1001355-01, October 2009)

xxii DCFM Professional User Manual

53-1001355-01

About This Document

1 Platform requires Fabric OS v5.1.0 or later

2 Platform requires Fabric OS v5.2.0 or later

3 Platform requires Fabric OS v5.2.1 or later

4 Platform requires Fabric OS v5.3.0 or later

5 Platform requires Fabric OS v5.3.1 or later

6 Platform requires Fabric OS v6.1.0 or later

7 Platform requires Fabric OS v6.0.0 or later

8 Platform requires Fabric OS v6.1.1_enc or later

9 Platform requires Fabric OS v6.2.0

10 Platform requires Fabric OS v6.1.2_CEE

11 Platform requires Fabric OS v6.3.0 or later

12 Professional Edition can discover, but not manage this Device. Use the device’s Element Manager, which can be

launched from the Connectivity Map, to manage the device. This device cannot be used as a Seed switch.

13 Professional Plus Edition can discover, but not manage this Device. Use the device’s Element Manager, which

can be launched from the Connectivity Map, to manage the device. This device cannot be used as a Seed

switch.

What’s new in this document

The following changes have been made since this document was last released:

• Information that was added:

• HBA configuration

• HBA discovery

• CEE/FCoE configuration

• Active sessions

• Icons legend

• Port Auto Disable

• Upload Failure Data Capture

• SNMP Informs

• Allow/Prohibit Matrix - save as, copy, and manual add

• FCiP - add and edit tunnels, select switch, add and edit FCiP circuit (IPv4 and IPv6)

FC8-32 Blade FC 8 GB 32-port Blade

FC8-48 Blade FC 8 GB 48-port Blade

FC10-6 Blade FC 10 - 6 ISL Blade

FCoE10-24 Blade 10 Gig FCoE port Blade

FX8-24 Blade

12, 13

8 Gbps 12-FC port, 10 GbE ports, 2-10 GbE ports Extension Blade

M4700F Fabric Switch

32-Port, 4 Gbps Switch

M6140 Director

140-Port Director

Mi10K Director

256-Port Director

TABLE 1 Supported Hardware

Device Name Terminology used in documentation