Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)
556 DCFM Professional Plus User Manual
53-1001356-01
FC troubleshooting
18
Tracing FC routes
The Management application enables you to select a source port and a destination port and
displays the detailed routing information from the source port or area on the local switch to the
destination port or area on another switch.
Trace route cannot be performed on the offline devices or virtual devices.
NOTE
Trace route is only supported on Fabric OS switches running Fabric OS 5.2 or later.
To trace routes, complete the following steps.
1. Select Configure > FC Troubleshooting > Trace Route.
The Trace Route dialog box displays.
2. Choose from one of the following options:
• Select a fabric from the Fabric list.
• Select a router from the Routing list. Requires Fabric OS 6.2 or later.
3. Select the source and destination ports by choosing one of the following:
The source and destination ports must be on the same fabric; however, they cannot be
connected to the same switch.
• To enter the ports, select the Enter port FC Address option.
a. Enter the source port FC address in the Source field.
f. Enter the destination port FC address in the Destination field.
• To select the ports, select the Select two device ports option.
a. Right-click a fabric in the Available Device Ports table and select Expand All.
g. Select the ports (two) for which you want to display the detailed routing information
from the Available Device Ports table.
4. Click the right arrow button.
5. Click OK.
The Trace Route Summary dialog box displays. This dialog box includes the following
information:
• Trace Route Summary. This table shows a brief summary of the trace including the port
WWN, port name, FC address, switch name, whether ping was successful, round trip time
(minimum, maximum, and average) and whether the device ports are in active zones.
• Forward Route. This tab shows the path taken by data packets from the port belonging to
the switch on which the trace route has been invoked (source port) to the port on the other
switch (destination port).