Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

Web Tools Administrator’s Guide 217

53-1000606-01

Configuring access control list policies

Support for the Access Control List (ACL) policies is currently defined in the Switch Connection

Control (SCC) and Device Connection Control (DCC) policies. SCC and DCC policy configuration in

base Fabric OS is performed on a switch-local basis.

FCS Policy can be created only once. While creating the FCS policy, the local switch WWN is

automatically included in the list. In the FCS list, the switch in the first position becomes the

primary FCS switch. If the first switch in the FCS list is not reachable, the next switch becomes the

primary switch. You can also explicitly specify the primary FCS switch.

If there is no FCS policy, the defined and active list is blank.

FIGURE 102 Security Policies tab for SCC/DCC/FCS policy configuration

Admin Domain considerations

ACL management can be done on AD255 and in AD0 only if there are no other user-defined Admin

Domains. Both AD0 (when no other user-defined Admin Domains exist) and AD255 provide an

unfiltered view of the fabric.

Creating an SCC, DCC, or FCS policy

You can create the FCS policy only once.

1. Open the Switch Administration window as described on page 29.

2. Click the Security Policies tab.

3. Select a policy by clicking on the appropriate tab (SCC, DCC, or FCS).