Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

188 Web Tools Administrator’s Guide
53-1000606-01
Disabling Access Gateway mode
15
NOTE
You cannot enable Access Gateway mode if Management Server is enabled. To disable Management
Server, use the MsplmgmtDeactivate command.
1. Select a switch.
2. Click Switch Admin in the Manage section under Tasks.
The Switch Administration window opens.
3. Save the switch configuration.
4. Click the Enable radio button in the Access Gateway Mode section.
5. Click Apply.
6. Click Yes to restart the switch in Access Gateway mode.
Disabling Access Gateway mode
1. Select a switch.
2. Click Switch Admin in the Manage section under Tasks.
The Switch Administration window opens.
3. Save the switch configuration.
4. Click the Disable radio button in the Access Gateway Mode section.
5. Click Apply.
6. Click Yes to restart the device in native switch mode.
Viewing the Access Gateway settings
You can view the effective Access Gateway settings for the selected switch. The view can be
customized.
1. Click Access Gateway Devices in the Monitor section under Tasks.
The Access Gateway Device Display window opens.