Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

Web Tools Administrator’s Guide 175
53-1000606-01
Setting up iSCSI Target Gateway Services
14
Editing the IP route
1. Open iSCSI Target Gateway Admin as described on page 171.
2. Select the iSCSI Port tab.
3. From the left pane, select the GbE port that will be used.
4. Select the IP Routes tab.
5. Click Edit.
A warning dialog box appears.
6. Click OK.
7. Enter a new value for the metric.
8. Click OK.
If you want to change a value other than the metric, you will need to delete this route and create
another in its place.
Managing the iSCSI Virtual Targets
iSCSI virtual target creation is the first pane in the iSCSI Target Gateway Admin module. The iSCSI
Virtual Target wizard provides two ways to create iSCSI targets: Create and Easy Create. Both
procedures are simple to use, but Create allows you to double check your work several times before
committing the changes.
You can edit a virtual target even when there is an active iSCSI session.
Creating iSCSI virtual targets
1. Open iSCSI Target Gateway Admin as described on page 171.
2. Select the Targets tab.
3. Click Create.
The VT Configuration Wizard opens.