Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

Web Tools Administrator’s Guide 125
53-1000606-01
Customizing basic monitoring graphs
9
The following procedure assumes that you have already created one of these customizable graphs.
1. Create or access the graph you want to customize. See “Creating basic performance monitor
graphs” on page 124 for instructions on creating a graph.
2. For Brocade 48000 directors, to display detailed port throughput utilization rates for each port
in a slot, click the arrows next to a slot. Port information for that slot is displayed in the graph.
For Brocade 200E, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, and 7600
switches, proceed to step 3.
3. To display detailed port throughput utilization rates for particular ports only, right-click
anywhere in the graph.and click Select Ports.
The setup dialog box displays, as shown in Figure 55. The title of the dialog box varies,
depending on the type of graph you are customizing, but the layout of the dialog box is the
same. Figure 55 shows an example of the setup dialog box for the Switch Throughput
Utilization graph.
FIGURE 55 Select Ports dialog box for customizing Switch Throughput Utilization graph
You can perform the following in the dialog box:
a. Double-click the domain to expand the slot/port list.
For the Brocade 48000 directors, click the + signs to expand the ports under each slot, as
shown in Figure 55.
b. Click the port you want to monitor in the graph in the Port Selection List. Use Shift-click
and Ctrl-click to select multiple ports.
c. Click Add to move the selected ports to the Selected Ports list.