Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 61-3
Publication Number: 53-1000242-01
SULB-1025
61
Probable
Cause
Indicates that the blade in the indicated slot has rebooted with new firmware. This is a normal step in the
firmwareDownload process.
Recommended
Action
Run the firmwareDownloadStatus command to monitor the firmwareDownload progress.
Severity WAR NIN G
SULB-1025
Message
Probable
Cause
Indicates that the new firmware has been downloaded to the specified AP blade and the AP blade will
reboot to active it.
Recommended
Action
Wait for the AP blade to reboot.
Severity WAR NIN G
SULB-1031
Message
Probable
Cause
Indicates that the switch has rebooted with the new firmware and is relocating the AP firmware.
Recommended
Action
No action is required.
Severity WAR NIN G
SULB-1033
Message
Probable
Cause
Indicates that the firmwareDownload process has completed normally on the switch.
<timestamp>, [SULB-1025], <sequence-number>,, WARNING, <system-
name>, The blade in slot <Slot number> will reboot with the new
firmware.
<timestamp>, [SULB-1031], <sequence-number>,, WARNING, <system-
name>, The switch is relocating an internal firmware image.
<timestamp>, [SULB-1033], <sequence-number>,, WARNING, <system-
name>, Switch has completed relocating the internal firmware image.