Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

58-60 Fabric OS Message Reference
Publication Number: 53-1000242-01
SEC-1320
58
SEC-1320
Message
Probable
Cause
Indicates that a domain not supporting ACL tried to join a fabric with a strict fabricwide policy.
Recommended
Action
No action is required. The domain is denied by disallowing all its E-ports from connecting to the fabric.
Severity WAR NIN G
SEC-1321
Message
Probable
Cause
Indicates that the security enable failed on the fabric because switch has conflicting configuration such
as fabric wide consistency configuration or AD configuration.
Recommended
Action
Verify that the security event was planned.
If the security event was planned, run the fddcfg --fabwideset "" command or ad --clear command to
clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable
command.
Severity ERROR
SEC-1322
Message
Probable
Cause
Indicates that this fabric is not able to support a DCC policy with more than 256 ports.
Recommended
Action
Reconfigure any policy that has more than 256 ports in member list, then save it.
Severity WAR NIN G
<timestamp>, [SEC-1320], <sequence-number>,, WARNING, <system-
name>, Non-acl domain <Domain Number> tries to join a fabric with
strict fabric wide policy
<timestamp>, [SEC-1321], <sequence-number>,, ERROR, <system-name>,
Failed secure mode enable command. Reason: <Reason>.
<timestamp>, [SEC-1322], <sequence-number>,, WARNING, <system-
name>, Some DCC policy is too large, distribution cancelled